IRF-633 UTP轉RS232/422/485

實現透過網路搖控遠端設備的完美方案

可以遠端控管電話總機 , 比如台中搖控日月潭的電話總機

刷卡機 , 刷卡鐘的遠端資料的延伸

RS-232串列印表機

可以控管防火牆跟Router和Switch的設備

遠端RS-232/422/485的環境控制設備

偵測溫度或濕度

可以加裝RS-232/422/485的I/O搖控設備

比如開關電源或檢查開關狀態

This unit is designed to provide a RS-232/422/485 connection over serial cable where the connected devices have RS-232/422/485 interfaces. Enabling serial devices such as CNCs and PLCs to instantly connect to an existing IP network, the Serial-to-Ethernet Device Server / Managed Media Converter represents a robust solution for devices controllers for MIS
personnel. This product can either be used as Device Server or Managed Media Converter.

Features

‧ Device Server & Managed Media Converter Mode option
‧ Complies with EIA/TIA and IEEE standards
‧ Supports 4 wires full duplex asynchronous serial data transmission (RS-422/485)
‧ Supports 2 wires half-duplex asynchronous serial data transmission (RS-485)
‧ Supports serial port asynchronous data rates up to 115.2 Kbps
‧ Extended distances up to 1.2 km (24 AWG) using RS-422/485
‧ Auto-detecting 10/100 Mbps Ethernet interface
‧ Terminator feature improves signal quality and distance
‧ LEDs for ‘at-a-glance’ device status
‧ Wall mount or Din-Rail mountable installation
‧ Power range 9~32V DC
‧ FCC Class A & CE approved

Specification

Standards: IEEE 802.3 (10BASE-T Ethernet);
IEEE 802.3u (100BASE-TX/ Fast
Ethernet); EIA/TIA RS-232/422/485;
EIA/TIA-574
Ports: 1x UTP 100/120ohm; RJ-45 type
1x 9-pin serial connector; D-sub, Male
Max. Distance: UTP: 100 meters (Cat 3/4/5.)
Serial: 15 meters (RS-232)
1,200 meters (RS-422, RS-485)
Data Rates: UTP: 10 or 100 Mbps
Serial: 115.2 kbps (asynchronous)
Signals: RS-232: TxD, RxD, CTS, RTS, DTR,
DSR, RI, DCD, GND RS-422: TxD+/-,
RxD+/-, GND RS-485: Data+, Data-,
GND
Configuration: Bits Per Second: 38400
Parity: None
Data bits: 8
Stop bits: 1
Flow Control: None
(The console connection is only available once the
DIP switch 1 is ON)
Switches:
DIP 1: Enables / disables console / data communication mode
DIP 2: Enables / disables RS-232
DIP 3: Enables / disables RS- 422/485 (4-wire)
DIP 4: Enables / disables RS-485 (2-wire)
DIP 5: N/A
DIP 5: N/A
DIP 7: Enables / disables termination (TMR)
Power: External power adapter; 9~32V DC @ 800mA
Frequency: 47Hz to 63Hz
Environment: Temperature: Operating: 0°C to 50°C
Relative Humidity: 10% to 80%, non-condensing
Storage: -20°C to 80°C
Relative Humidity: 5% to 90%, non-condensing
Emissions: FCC Part 15 of Class A & CE approved
Dimensions: 109.2 x 90 x 30mm (L x W x H)
Weight: 280 gram